How we cleaned a reeeeeally dirty concrete floor
Deep Cleaning a Concrete Restaurant Floor in Downtown Charleston
This was the dining room of a restaurant in downtown Charleston. The concrete around the booths had enough buildup that you could barely see its lighter color before we started. Here’s how we cleaned it.
1. Apply an alkaline degreaser
We sprayed the concrete with an alkaline degreaser first. Restaurant floors pick up oils along with tracked-in dirt, and the degreaser helps break up the oily film that holds the dirt to the floor.
2. Scrub with a rotary floor machine
Next, we scrubbed the floor with a rotary machine to work the degreaser across the concrete and loosen the buildup. You can see the cleaning solution turn muddy as the machine works through the area in front of the booths.
3. Rinse with hot water and vacuum it up
For the final pass, we used a hard-surface extraction tool that rinses with water heated to about 200°F through jets running at about 1,500 PSI. A vacuum inside the tool pulls up the rinse water, degreaser, and loosened dirt as we go.
That’s the pass you see at the end of the video. The clean strip shows up immediately because the tool is rinsing the concrete and picking up the dirty water in the same pass. Unfortunately I didn't get a chance to snap a good 'after' pic the following morning...
If your restaurant’s concrete floors still look dirty after mopping, contact Carolina Floor Solutions for a concrete floor cleaning quote. We serve downtown Charleston and the surrounding area.



